Valentines Day Gift 3D Printed

Difficulty: Easy

72

ABOUT

Build a beautiful 3D printed Valentines day gift for a family member or significant other. Combine the 3D print with EL wire to show off the image on the inside. This concept can be modified to fit any type of person to make it a one of a kind gift!

3D Print Files

Download 3D Print

Diagram

Many of these wires polarity can be found using a multimeter. The switch has two wires going to it which connects the signal. Depending on the LED used to light up the image from behind, you may have to calculate and come up with a resistor value to attach inline with the LED. Make sure the two AA batteries are in series to boost the voltage from 1.5 volts to 3 volts which is a stable voltage for the component.

More Projects You May Like

LED Sign (v1)

Draw your favorite icons and watch them glow when plugged in. Great for a gift to a friend!

3D Printed LED Sign (v2)

Design an exciting LED Sign that runs off of batteries with an ATTiny85. Press the button to change colors or add effects to the sign.

3D Printed Sign (v4)

Create a custom made plexiglass sign. It has over 20 different colors and animations that can be toggled using a push button. This is portable and runs off of three AA batteries.

3D Printed Sign (v3)

Create a custom made plexiglass sign. It has over 20 different colors and animations that can be toggled using a push button. This is portable and runs off of three AA batteries.